Muir to launch Inox Pro stainless steel drivetrain at Metstrade
Tasmania-headquartered Muir Anchoring Systems will launch the Inox Pro stainless steel drivetrain option across its recreational windlass, drum winch and capstan range at this week’s Metstrade exhibition in Amsterdam.
Developed to transform unit longevity, in response to customer feedback to tackle the most common cause of anchor winch failure: the alloy casing below deck corroding in the wet anchor locker, the Inox Pro provides stainless steel units across Muir’s recreational range for the first time.

Inox Pro is ordered as an upgrade line item against the standard model, and it can also be retrofitted to a Muir unit as a motor-and-gearbox exchange. Thus, an owner with a corroding drivetrain can retain the top works and replace only the part that has failed.
The Inox Pro housings are built with the same grade of stainless steel as the top works. Gear train, brake, clutch and sealing are unchanged from Muir’s standard build, so installers keep the same footprints, mounting, wiring and controls. With the new housings, there are no painted casings to touch up and no aluminium-to-stainless joint to isolate with anti-corrosion paste or tape.
The line will be unveiled at Metstrade this week.
Max Buckley, general manager of Muir Anchoring Systems, comments: “Dealers and owners kept telling us the same thing. The polished top works on a windlass or drum winch will last twenty years, while the alloy gearbox and motor housing underneath often succumb due to two things: a painted alloy casing whose coating fails due to saltwater corrosion and the aluminium-to-stainless galvanic couple at every stud, flange and shaft. By building the whole unit to the standard of the parts you can see, the Muir Inox Pro upgrade ends the most common way a winch dies: not worn out, but eaten away below deck.”
An option rather than a new model, the Inox Pro upgrade can be specified across the recreational range: Storm vertical windlasses (VR and VRC), compact horizontal windlasses (HR), DW and DFF drum winches, and Sailor mooring capstans (VC). The range suits power and sailing boats from about 5m to 25m (16ft to 82ft).
Buckley continues: “Inox Pro brings the higher material standard to every format in our recreational range, from a trailer boat to a 25-metre motor yacht. The whole winch is now stainless, not only the parts on show, and we are confident in backing the upgrade with the extended warranty to the motor and gearbox. With significant benefits for cruisers, boat owners, chandlers and yards, the Inox Pro is crafted in Tasmania and built to last for any boat, new or existing. It is an upgrade option demanded by the recreational market, delivering a longer-lasting product built to raise anchoring standards for owners across the US, Europe and worldwide, while introducing more people to the Tasmanian company behind the gear on the superyachts they see in the marina.”
The Muir windlasses with the Inox Pro drivetrain are backed by Muir’s extended five-year warranty on the gearbox and three-year warranty on the motor, alongside the company’s five-year top works warranty.
Built on the same production lines as Muir’s superyacht and commercial equipment, Inox Pro has been developed and tested in-house at Muir’s factory in Kingston, Tasmania, including salt-spray testing, under its ISO 9001 quality system.
For boatbuilders and refit yards, the Inox Pro upgrade option is designed to provide fewer warranty calls and callbacks, no change to installation, and a longer warranty to pass on to the owner. Drawings, 3D models and chain and rope compatibility data are available from Muir technical support.
Visit Muir at Metstrade – stand 07.432



Leave a Reply